Zooz 800 Series Z-Wave Long Range Toggle Dimmer ZEN74, White | Direct 3-Way (No Add-On Switch Needed) | Z-Wave Hub Required Toggle Dimmer ZEN74 800LR

NOTE: Do NOT connect this switch to ceiling fans, motors, or home appliances. Use with lighting only. NEUTRAL WIRE REQUIRED SPECIFICATIONS: Model Number: ZEN74 800LR Z-Wave Region: US / MX / CA Power: 120 VAC, 60 HzMaximum Loads: 100W LED, 300W Incandescent Z-Wave Range: Up to 300 feet line of sight (no walls or obstructions, up to 1300 ft with Z-Wave Long Range) Operating Temperature: 32-104° F (0-40° C) Installation and Use: Indoor only Will it dim my bulbs? You'll be able to adjust brightness levels between 10% and 100% (with full on/off capability) for the following popular dimmable LED bulbs: Amazon Basics BROADA CREE Ecosmart GE Halo Sunco Utilitech Recessed Dimmable LED's Utilitech Dimmable LED's Do NOT use with Feit, Luminus, or Lithonia bulbs Manual Operation: Click the toggle up to turn on the light to the last brightness level. It takes around 1 second for the dimmer to reach full brightness. The ramp rate is adjustable if your hub supports advance setting input. Click the toggle down to turn off the light (with a fade-out effect and 1-second ramp rate). Press and hold the toggle up to add more brightness. Press and hold it down to reduce brightness. After power failure, the switch will automatically turn on to the last brightness level. In a 3-way installation, the secondary (mechanical switch) can only turn the light on or off. The secondary mechanical switch will always turn the light on only to the last brightness level. Dimming is only available from the primary Zooz switch and your Z-Wave software. Will it work with my smart speaker? You smart speaker is not a Z-Wave controller so you will need a compatible Z-Wave hub to control this switch with voice commands.